14 Great Fish Finder Mounting Ideas for Any Boat

14 Great Fish Finder Mounting Ideas for Any Boat
Rate this post

Whether you’re an avid fisherman or just enjoy being out on the water, having a good fish finder can make all the difference. But, finding the right mounts for your fish finder can be just as important.

There are a few things to consider when choosing a mount for your fishfinder. First, you’ll want to make sure that the mount is sturdy and can hold the fish finder securely.

You’ll also want to make sure that the mount is easy to install and remove, so you can take it with you when you switch boats.

Quick Video of The Great Fish Finder Mounting Ideas for Any Boat

14 Tried And Tested Fish Finder Mounting Ideas 2022

Fish Finder Mounting Ideas for Any Boat

Whichever mounts you choose, make sure it is sturdy and easy to install and remove. With the right transducer mount, you’ll be able to enjoy your fish finder for years to come.

There are many different ways to mount a fish finder on a boat. Some are more difficult than others, but all have their benefits.

The following 14 fishfinder mounting ideas are some of the most popular ways to mount a fish finder, and each has its unique advantages.

So let’s deep dive into it:

#1 Flush Mount

A flush mount is one of the most popular ways to mount a fish finder. It’s simple and easy to do, and it keeps the fish finder close to the hull of the boat.

This is a good option if you are worried about the fish finder being damaged by waves or other objects.

If you’ve ever been fishing, you know how frustrating it can be to constantly lose your fishfinder. Well, there’s a solution to that problem, flush mounting your fish finder in your dash.

This ensures that your finder will always be within reach, and it also looks much nicer than having it dangling from your windshield.

There are a few things to keep in mind when flush mounting your fishfinder. First, make sure that the area you’re mounting it in is large enough to accommodate the finder.

You’ll also need to drill a few holes in your dash to run the wires through. Finally, it’s important to use the proper mounting bracket to ensure that your finder is secure.

If you follow these steps, you’ll be able to easily flush mount your fish finder in your dash. This will keep it within easy reach and make it look much nicer.

#2 Surface Mount

A surface mount is another popular option. It is easy to install and it keeps the fish finder close to the hull of the boat. This is a good option if you are worried about the fish finder being damaged by waves or other objects.

Surface mounts are small devices that are placed on the surface of the water, and they transmit signals that are used to generate a fish finder image.

These signals are then sent to the fish finder unit itself, which uses them to create a real-time image of what’s beneath the surface of the water.

There are a few things that you need to keep in mind when surface mounting your fishfinder. First, you need to make sure that the surface mount is placed in an area where there is little to no debris.

This will ensure that the signals are not obstructed and that the image on your fish finder is as clear as possible.

You need to make sure that the surface mount is placed in an area where there is good water flow, good sunlight, and good visibility.

This will help to ensure that the signals are not disrupted and that the image on your fish finder is as clear as possible.

Surface mounting your fish finder is a great way to get the most out of your investment, and it’s a good way to ensure that you’re able to find fish when you’re out on the water.

Keep these tips in mind, and you’ll be able to surface mount your fishfinder like a pro!

#3 Through Hull Mount

A through-hull mount is a more difficult option, but it has its benefits. It puts the fish finder closer to the water, which can help you get a better signal. This is a good option if you are looking for the best possible performance from your fishfinder.

Through hull mounts, on the other hand, are a bit more difficult to install but offer a few advantages over transom mounts.

One advantage of through-hull mounts is that they’re less likely to be stolen. This is because through-hull mounts are installed below the waterline, making them much more difficult to reach. 

Another advantage of through-hull mounts is that they offer a better view of the fish finder.

This is because the transducer is installed below the hull, which means that it’s less likely to be obstructed by the boat’s hull.

If you’re looking for the best view of your fish finder, then a through-hull mount is the way to go.

However, if you’re worried about theft or you don’t want to drill any holes in your boat, then a transom mount is probably a better option.

#4 Transom Mount

Anglers often look for different ways to mount their fish finder on their boat. One of the most popular methods is through the use of a transom mount.

This type of mount allows for easy installation and removal of the fish finder, as well as providing a solid base for the device.

Here are a few tips on how to properly mount a fish finder using a transom mount.

1. Start by attaching the transom mount to the back of the fishing boat. Make sure that the mount is securely in place before moving on.

2. Next, take the fish finder and place it on the mount. It is important to make sure that the device is properly aligned before moving on.

3. Once the fish finder is in place, use the provided screws to secure it to the mount. Make sure that the screws are tight, but do not over-tighten them.

4. Finally, connect the power cable to the fish finder and then plug it into a power source. Once everything is properly connected, turn on the device and you should be ready to go.

This is a relatively simple process, but it is important to take your time and make sure that everything is properly secured.

#5 Portable Mount

When choosing a portable transducer mount for your fish finder, there are a few things you’ll want to keep in mind. First, you’ll need to decide what type of mount you want.

There are suction cup mounts, clamp mounts, and stake mounts. Each type has its own advantages and disadvantages, so it’s important to choose the one that will work best for your particular situation.

Once you’ve decided on the type of mount you want, the next step is to choose the location. You’ll want to pick a spot where you’ll be able to see your fishfinder easily and where there’s not a lot of clutter.

Once you’ve chosen the location, the next step is to install the mount.

If you’re using a suction cup mount, the process is pretty simple. Just affix the mount to the chosen location and then attach your fishfinder.

If you’re using a clamp mount, the process is similar. Just attach the mount to the chosen location and then tighten the clamp to secure the fish finder.

For stake mounts, the process is a little more involved. First, you’ll need to drive the stake into the ground. Once the stake is in place, you can then attach the mount.

After the mount is secure, you can then attach your fishfinder.

Once your fish finder is mounted, the next step is to power it on and start using it.

Most fish finders come with detailed instructions on how to use them, so be sure to read the manual before you get started.

#6 Rail Mount

Fishfinders can be mounted in a variety of ways, including on the transom (rear) of a boat, on a trolling motor, or on a fishing kayak. Rail mounts are a popular option for boat-mounted fish finders.

Rail mounts allow the fish finder to be mounted on the boat’s gunwale or rails. This provides a variety of benefits, including:

  • Better visibility of the fish finder’s display.
  • More protection for the fish finder from the elements.
  • Easy access to the fish finder for making adjustments.

Rail mounts are available in a variety of sizes to fit most boat rails. They typically have a quick-release mechanism that makes it easy to remove the fish finder when it’s not needed.

If you’re looking for a convenient way to mount your fish finder on your boat, a rail mount is a great option.

With a rail mount, you’ll enjoy better visibility and protection for your fish finder and easy access for making adjustments.

#7 Console Mount

If you’re an avid fisherman, then you know the importance of having a good fish finder. But what’s the best way to mount your fish finder so that you can get the most accurate readings?

Console mounts are a popular option, as they allow you to easily see and access your fishfinder. But there are a few things you need to keep in mind when mounting a fish finder by console.

First, make sure that the mount is securely attached to the console. You don’t want your fish finder bouncing around while you’re driving!

Second, consider the placement of the mount. You want to be able to see the screen easily, so make sure it’s not blocked by other items on the console.

Third, make sure the cord is long enough so that you can reach the fish finder from anywhere in the boat. You don’t want to have to constantly move around to get a good reading.

Fourth, if you’re using a GPS-enabled fish finder, make sure the GPS antenna is placed in a clear area so that it can get a good signal.

Following these tips will help you get the most out of your fish finder console mount.

#8 Swivel Mount

Here’s a quick guide on how to mount a fish finder by swivel mount:

1. First, you’ll need to find a suitable location for your fishfinder. It’s important to find a spot where the transducer can be lowered into the water without any obstruction.

2. Once you’ve found the perfect spot, drill a hole through the hull of your boat.

3. Next, attach the swivel mount to the fish finder using the screws that come with it.

4. Finally, lower the transducer into the water and you’re ready to start fishing!

Pro Tips:

1. It’s a good idea to attach the swivel mount to a piece of plywood or another sturdy surface before drilling the hole in your boat. This will help to prevent any damage to your boat.

2. When choosing a location for your fish finder, make sure to avoid any areas where there is a lot of turbulence. This will help to ensure that the transducer can work properly.

By following these simple steps, you’ll be able to get the most out of your fish finder and up your success rate when you’re out on the water!

#8 Bow Mount

Bow-mount is another good option for anglers who want portable fish finder mounting ideas.

Bow-mounted fish finders are mounted on the bow of the boat, so they’re easy to see and use while you’re fishing.

They’re also great for shallow-water fishing because you can see the fish that are swimming under your boat.

No matter which type of fish finder you choose, you’ll need to know how to install it properly. In this article, we’ll show you how to mount a fish finder with a transom mount and a bow mount.

Installing a Bow-Mounted Fish Finder

  1. Choose the right location for your fishfinder. The best place to mount your fish finder is on the bow of the boat. You’ll want to mount it in a location that’s easy to see and reach.
  2. Use the mounting template that came with your fish finder to mark the holes for the mounting screws.
  3. Drill the holes for the mounting screws.
  4. Attach the mounting bracket to the fish finder using the screws.
  5. Attach the fish finder to the mounting bracket.
  6. Run the power cable from the battery to the fish finder.
  7. Connect the power cable to the fish finder.
  8. Turn on the fish finder and test it out.

Mounting a fish finder on your boat is a simple process, but it’s important to do it correctly.

By following the steps in this article, you can be sure that your fish finder is mounted properly and ready to help you catch fish.

#9 Stern Mount

A stern mount is a good option if you want to keep the fish finder close to the stern of the boat. It is easy to install and it doesn’t require any drilling. This is a good option if you want the fish finder close to the stern.

#10 Inflatable Mount

An inflatable mount is a good option if you want to be able to move the fish finder around. It is easy to install and it is portable, so you can take it with you when you go fishing.

This is a good option if you want the flexibility to move the fish finder around.

#11 Kayak Mount

A fish finder is a great tool for any kayak fisherman, as it can help you locate fish in the water below you.

There are a few different ways to mount a fish finder on your kayak, and the best method will depend on the type and size of fish finder you have, as well as the type of kayak you have.

In general, you will want to mount the fish finder on the front of the kayak, near the cockpit, so that you can easily see the screen while you are paddling.

Below is the step-by-step guide on how to mount a fish finder on a kayak;

1. Place the transducer in the water. Make sure that the transducer is not obstructed by the hull of the kayak.

2. Attach the transducer to the kayak. Most kayaks have a transducer mount built-in. If your kayak does not have a transducer mount, you can use a suction cup mount.

3. Place the fish finder in the cockpit of the kayak. Make sure that the fish finder is within reach of the paddler.

4. Route the power cable and transducer cable through the hull of the kayak. If your kayak has a transducer mount, there should be a hole for the cables to pass through.

5. Connect the power cable to the fish finder.

6. Connect the transducer cable to the fish finder.

7. Turn on the fish finder.

#12 Canoe Mount

To properly mount a fish finder on a canoe, you will need to first determine the best location for the transducer.

Once you have found the ideal spot, you will need to drill a hole through the hull of the canoe and attach the transducer.

Finally, you will need to run the wiring from the fish finder to the transducer.

#13 SUP Mount

If you’re an avid fisherman, you know that having a good fish finder can make all the difference in your catch rate.

But if you’re new to the sport, you might wonder how to properly mount a fish finder on your SUP (stand-up paddleboard).

Here’s a quick guide on how to do it:

  1. Choose the right location for your fishfinder. You’ll want to mount it in a spot that’s easily visible and within reach.
  2. Attach the transducer to your SUP. Most SUPs have a built-in transducer mount, but if yours doesn’t, you can use an adhesive mount or strap it down with bungee cords.
  3. Connect the power cable to your fish finder and transducer.
  4. Mount the fish finder itself. Many fish finders come with a suction cup mount, which is perfect for attaching to your SUP.
  5. Turn on your fish finder and start fishing!

Follow these simple steps and you’ll be enjoying your new fish finder in no time.

#14 Ice Fishing Mount

To get the most out of your ice fishing trip, you need to make sure your fish finder is properly mounted. This may seem like a daunting task, but with a few simple steps, you’ll be an expert in no time.

1. First, you need to purchase a good-quality ice fishing transducer. This is the device that will emit the sonar waves that will help you locate fish beneath the ice.

2. Once you have your transducer, it’s time to start thinking about where you want to mount it. A good rule of thumb is to mount it as close to the center of your ice fishing hole as possible. This will give you the most accurate readings.

3. Now it’s time to start drilling. You’ll need to drill a hole in the ice that is big enough to accommodate your transducer. Be careful not to drill too close to the edge of the ice, as this could cause the ice to break.

4. Once you have your hole drilled, it’s time to start mounting the transducer. First, you’ll need to attach the transducer to the mounting bracket. Then, you’ll need to secure the bracket to the ice with screws.

5. Once the transducer is mounted, you’ll need to connect it to your fishfinder. Most transducers come with a short cable that will need to be plugged into the fish finder.

That’s it! You’re now ready to start using your fish finder to locate fish beneath the ice.

FAQs: People Also Asked

Where is the best place to mount a fish finder on my boat? 

There are several great options for mounting a fish finder on your boat, depending on the type and size of your boat. For smaller boats, a console is a great option. For larger boats, the transom is a good choice. You can also mount the fish finder on the trolling motor.

How do I ensure my fish finder is properly mounted on my boat?

You can do a few things to ensure your fish finder is properly mounted on your boat. First, you can use a mounting bracket to secure the fish finder to the boat. Second, you can use straps or tie-downs to secure the fish finder to the boat. Third, you can use a shock-absorbing mount to reduce vibration and protect the fish finder.

Can you use a portable fish finder on a boat?

You can use a portable fish finder on a boat! Many anglers prefer portable fish finders because they offer more flexibility than fixed fish finders. With a portable fish finder, you can easily move it from one spot to another on the boat, or even take it with you when you’re fishing from the shore. Plus, portable fish finders are usually less expensive than their fixed counterparts.

Where is the best place to mount a transducer?

The best place to mount a transducer is on the hull of the boat, in the center, and as close to the waterline as possible.

Should I use a transducer mounting plate?

Transducer mounting plates are not necessary, but they can be helpful in some situations. For example, if you are mounting a transducer on a boat, a mounting plate can provide a more stable platform and help to protect the transducer from impact.

Conclusion:

If you’re looking for some great fish finder mounting ideas for your boat, look no further! The above ideas are perfect for any boat, and they’ll help you catch more fish than ever before!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.